螺旋風管接頭的強度遠高于徑向直縫

發布人：http://www.hkcts.com.cn   發布時間：2022-07-27 15:29:52

螺旋風管具有精湛的限筋技術，使螺旋風管接受強壓力。咬口處的淹沒縫厚度是管體厚度的四倍。管材剛度很大，表現出堅固性的優越性，能接受大壓力載荷而不發生損傷變形，材料厚度可減少15%。

The spiral air duct has exquisite reinforcement limiting technology, which makes the spiral air duct accept strong pressure. The thickness of the submerged joint at the undercut is four times that of the pipe body. The pipe has great rigidity, showing the superiority of firmness. It can accept large pressure loads without damage and deformation, and the thickness of the material can be reduced by 15%.

這大大降低了生產成本。另外，需要告訴我們的是，螺旋風管的制造工藝是非常精密的。它一般是用特種鋼制成的，質量自然有保證，可以使用幾年。共同作用還能保證長時間使用不變形，大大延長了風管的使用壽命，對我們的生產具有重要的現實意義。

This greatly reduces the production cost. In addition, we need to know that the manufacturing process of spiral duct is very precise. It is generally made of special steel, and its quality is naturally guaranteed. It can be used for several years. The combined action can also ensure the long-term use without deformation, greatly extending the service life of the air duct, which is of great practical significance to our production.

螺旋風管的制造是選用帶鋼帶卷，用風管成型機一次性咬出咬骨形狀，沿螺旋漸開線軌跡滾成圓管狀，并將咬縫壓在一起，后按要求長度切割而成。自投放市場以來，因其性能優異、運行成本低，廣泛應用于造船、通風、空調、凈化、橋梁除塵、機場、隧道等建筑行業。

Spiral air duct is manufactured by using steel strip roll, biting out the biting shape at one time with the air duct forming machine, rolling it into a circular tube along the spiral involute track, pressing the biting seams together, and then cutting it according to the required length. Since it was put on the market, it has been widely used in shipbuilding, ventilation, air conditioning, purification, bridge dust removal, airports, tunnels and other construction industries because of its excellent performance and low operation cost.

送冷風和送熱風常見的方式是空調的管道，需要保溫。還可在內部粘貼保溫材料，使風管具有美觀的螺旋狀外觀，并可避免吊頂，降低工程造價。螺旋風管的制造自動化程度高，生產速度非?？?。一般風管每分鐘可產生20～40米，是由于其原材料鍍鋅帶鋼低于整體鍍鋅鋼板，其工廠化生產和標準標準化使成本低于矩形風管。

The common way to supply cold air and hot air is the pipe of central air conditioning, which needs heat preservation. Insulation materials can also be pasted inside, so that the air duct has a beautiful spiral appearance, and the ceiling can be avoided and the project cost can be reduced. The manufacturing automation of spiral air duct is high, and the production speed is very fast. Generally, the air duct can produce 20 ~ 40 meters per minute, because the price of its raw material galvanized steel strip is lower than that of the overall galvanized steel plate, and its industrialized production and standardization make the cost lower than that of rectangular air duct.

螺旋風管選用技術設備后，如果配備與其他工序相對應的加工設備，各工序空調風管的加工進度和質量都會有較大提升，但加工工藝仍為多工序分離加工，仍需大量人力在多臺設備上旋轉，空調風管的加工規劃、加工力和質量仍停留在較低階段?？上驳氖?，選用普通板式法蘭連接技術后，空調風管的加工工序不僅少了，還省去了許多人工操作工序，仍需下料、切角、壓筋、普通板式法蘭成型、咬角縫、組裝等工序。

After using advanced technology and equipment for spiral air duct, if equipped with processing equipment corresponding to other processes, the processing progress and quality of air-conditioning air duct in each process will be greatly improved, but the processing technology is still multi process separate processing, which still requires a lot of manpower to rotate on multiple equipment, and the processing planning, processing power and quality of air-conditioning air duct are still at a low stage. Fortunately, after using the ordinary plate flange connection technology, the processing procedures of the air-conditioning duct are not only less, but also many manual operations are omitted, including blanking, corner cutting, rib pressing, forming of the ordinary plate flange, corner seaming, assembly and other procedures.

接頭為周向，接頭強度遠高于徑向直接頭，所以在1.5倍工作壓力下能保證接頭處無裂紋，因為其原材料鍍鋅帶鋼低于整片鍍鋅鋼板，其工廠化生產和標準標準化使成本低于矩形風管;另外，由于其支吊架需求量小，安裝工作量小，所以總成本低。由于矩形風管四角易發生湍流，有用流動面積減小，空氣流動性好，有用流動面積大，產品的二次噪聲因強度大而小。因此，風管振動引起的低頻噪聲更小，空氣流動性能好，系統壓降小，日常運行系統耗電少。

The joint is circumferential, and the strength of the joint is much higher than that of the radial direct head, so it can ensure that there is no crack at the joint under 1.5 times the working pressure, because its raw material galvanized steel strip is lower than the whole galvanized steel sheet, and its industrialized production and standardization make the cost lower than that of the rectangular air duct; In addition, due to the small demand for supports and hangers and the small installation workload, the total cost is low. Because the four corners of the rectangular air duct are prone to turbulence, the useful flow area is reduced, the air fluidity is good, the useful flow area is large, and the secondary noise of the product is small due to its high intensity. Therefore, the low-frequency noise caused by air duct vibration is smaller, the air flow performance is good, the system pressure drop is small, and the daily operation system consumes less power.

以上就是為大家介紹的有關濟南風管加工廠的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.hkcts.com.cn

The above is a detailed introduction about Jinan air duct processing factory. I hope it can help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://www.hkcts.com.cn