通風管道發生噪音怎樣做好減少噪音？

發布人：http://www.hkcts.com.cn   發布時間：2021-08-23 18:06:12

一、噪音來源于

1、 The noise comes from

通風管道管理體系工作噪音一般來自下列好多個層面:

The working noise of ventilation pipe management system generally comes from the following levels:

1、通風風管的晃動。由于通風風管原材料是鍍鋅鋼板或是是金屬?gòu)?fù)合材料，在工程施工時要不容樂觀依照工程施工檢驗標準挑選不銹鋼厚度和施工技術，例如風管制作錯漏、豎直度、通風風管結構加固、抗震支架挑選及制做機器設備這些。到工程施工環節，通風口盡可能不必靠近機器設備。電風扇前后左右盡可能都是有5米之上的長短。假設能夠提升彎管數量還可以降低噪音，出風口改裝濾網，噪音操縱功效也很好。

1. Shaking of ventilation duct. As the raw material of ventilation air duct is galvanized steel sheet or metal composite material, it is not optimistic during project construction. Stainless steel thickness and construction technology shall be selected according to the project construction inspection standards, such as air duct fabrication error and leakage, verticality, ventilation air duct structure reinforcement, seismic support selection and manufacturing machinery and equipment. During the construction phase, the vent shall not be close to the machinery and equipment as much as possible. As far as possible, the electric fan is more than 5 meters long. Assuming that the number of bends can be increased and the noise can be reduced, the filter screen is modified at the air outlet, and the noise control effect is also very good.

2、離心風機的聲響。解決方式 大家一般能裝消音器解決通風風管腦中風的矛盾聲。

2. Sound of centrifugal fan. Solution: we can generally install silencers to solve the contradictory sound of cerebral apoplexy in ventilation ducts.

二、生產制造操縱

2、 Manufacturing manipulation

一般在生產制造環節就需要考慮到噪音的難題，整體規劃操縱好管中風力，避免聲響噪音。

Generally, the noise problem needs to be considered in the production and manufacturing process, and the wind force in the pipe shall be well planned and controlled to avoid noise.

1、操縱進風口、送風間距，避免空氣對流時自激振蕩現象和小循環系統室內空間。

1. Operate the air inlet and air supply spacing to avoid self-excited oscillation during air convection and indoor space of small circulation system.

2、螺旋風管離心葉輪管理體系轉子動平衡校調有效一切正常正負極不超5絲的高矮。

2. The spiral duct centrifugal impeller management system can effectively adjust the rotor dynamic balance, and the height of all normal positive and negative poles does not exceed 5 wires.

3、軟接設備標準，避免軟接白帆布松馳產生空氣阻力而產生車噪。

3. The flexible connection equipment is standard to avoid the vehicle noise caused by the air resistance caused by the relaxation of the soft connection white canvas.

4、懸架采用趁便繃簧減震職業的射頻連接器，緩解工作時易扭矩產生的顫動或共頻。

4. The suspension adopts the radio frequency connector that takes advantage of the tension spring to reduce the vibration or common frequency caused by torque during operation.

5、螺旋風管風管拐角盡可能減少。

5. Spiral duct corners shall be minimized.

三、安裝全過程中的防止

3、 Prevention during the whole installation process

通風管道安裝全過程中震動和噪音的防止關鍵從下列好多個層面下手：

The key to prevent vibration and noise during the whole process of ventilation pipe installation is from the following aspects:

1、離心風機安裝時按設計方案規定或施工工藝規定，設定減震設備。

1. During the installation of centrifugal fan, damping equipment shall be set according to the provisions of design scheme or construction process.

2、為避免螺旋風管震動，在每一個系統軟件螺旋風管的拐彎處、與排風機和出風口的相接處設支撐架。

2. In order to avoid the vibration of spiral air duct, support frame shall be set at the corner of spiral air duct of each system software and the connection with exhaust fan and air outlet.

3、離心風機、螺旋風管相互連接選用塑料軟管聯接，離心風機吸入口的塑料軟管安裝要保證緊松適當，防止因軟接到松減少進通風口總面積，而造成噪音和震動。

3. The centrifugal fan and spiral air duct shall be connected with each other by plastic hose. The plastic hose at the suction inlet of the centrifugal fan shall be properly tightened and loosened to prevent noise and vibration caused by reducing the total area of the air inlet due to loose connection.

4、螺旋風管安裝及與構件聯接，聯接嚴實 ，無透風狀況，以防造成透風噪音。

4. Spiral air duct shall be installed and connected with components tightly without ventilation to prevent ventilation noise.

本文由濟南通風管道 http://www.hkcts.com.cn友情奉獻.更多有關的知識請點擊:真誠的態度.為您提供為的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

This paper is composed of Jinan ventilation pipeline http://www.hkcts.com.cn Friendship and dedication. For more relevant knowledge, please click: sincere attitude. We will provide you with comprehensive service. More relevant knowledge will be offered to you one after another. Please look forward to it