消防排煙風機的整體結構材料

發布人：http://www.hkcts.com.cn   發布時間：2023-03-14 20:27:46

在運用消防排煙風機的過程中，需求做好日常的保養。設備存在各種不同的問題，可能都是正常的一些磨損，能夠有適當?shù)谋ｐB(yǎng)，并且近期來做好相應的作業，那么許多的問題能夠及時的被發現和解決，進而防止在作業的過程中出現嚴峻的毛病，影響到詳細的作業效率。

In the process of using the fire exhaust fan, daily maintenance is required. There are various problems with the equipment, which may be normal wear and tear, proper maintenance, and corresponding operations in recent years, so many problems can be found and solved in time, thus preventing serious problems in the process of operation and affecting the detailed operation efficiency.

除了消防排煙風機的整體結構材料，其他要素也能夠使風機前進溫度。要害的部件是軸承。也就是說，假設軸承堅持氣流不熱，它們不易遭到高溫的影響，并且空氣溫度能夠比軸承的溫度更高。這首要得益于內嵌風機本身具有的氣流驅動組件。在這種情況下，設備有時能夠規劃成冷卻器，經過驅動部件吸入外部空氣做額定的冷卻。

In addition to the overall structural material of the fire exhaust fan, other elements can also make the fan advance temperature. The key component is the bearing. In other words, assuming that the air flow of bearings is not hot, they are not susceptible to high temperature, and the air temperature can be higher than the bearing temperature. This is mainly due to the airflow drive components of the embedded fan itself. In this case, the equipment can sometimes be planned as a cooler, and the external air is sucked through the driving parts for rated cooling.

裝置消防排煙風機之前，需求做的作業就是找好裝置方位。經過實踐剖析得知，風機的裝置方位需求講究合理性，只有如此，才干發揮其應有的功效。3c消防排煙風機在裝置時應留心地下通道、樓層通風及樓道出口等方位，風機的電源、風機、外殼等在裝置時確保質量沒有問題，方可安頓、裝置在設計指定方位。對于風機與地面的聯合面和出風彈道的連接應調動，使之合作時符合應急要求，沒有得強行連接。

Before installing the fire and smoke exhaust fan, the work to be done is to find the location of the device. Through practical analysis, it is known that the installation location of the fan needs to be reasonable. Only in this way can it play its due role. 3c The fire and smoke exhaust fan shall pay attention to the underground passage, floor ventilation and corridor exit when installing. The power supply, fan and shell of the fan can be installed and installed in the design direction only after ensuring that there is no quality problem during installation. The joint surface between the fan and the ground and the connection of the air outlet trajectory should be mobilized to make the cooperation meet the emergency requirements, and no forced connection is required.

葉輪結垢經濕法除塵設備凈化過的煙氣濕度很大，未除凈的粉塵顆粒盡管很小，但粘度很大。當它們經過引風機時，在氣體渦流的效果下會被吸附在葉片非作業面上，尤其在非作業面的進口處與出口處構成比較嚴峻的粉塵結垢，并且逐漸增厚。當有些灰垢在離心力和振蕩的一起效果下掉落時，葉輪的平衡遭到損壞，全部引風機都會發生振蕩。

The humidity of the flue gas purified by the wet dedusting equipment for impeller scaling is very high, and the dust particles that are not cleaned are very small, but the viscosity is very high. When they pass through the induced draft fan, they will be adsorbed on the non-working surface of the blade under the effect of gas eddy current, and form severe dust scaling at the inlet and outlet of the non-working surface, and gradually thicken. When some ash scales fall under the combined effect of centrifugal force and oscillation, the balance of impeller will be damaged, and all induced draft fans will oscillate.

有了濟南鐵皮風管加工上面的小總結，希望對廣大客戶有所幫助，如果有什么不理解的或者尋求幫助的請點擊我們的網站：http://www.hkcts.com.cn或者來電咨詢，我們會盡全力為您解決

With the summary of Jinan iron sheet air duct processing, I hope it can help our customers. If you have any questions or need help, please click our website: http://www.hkcts.com.cn Or call for consultation, and we will do our best to solve it for you