不銹鋼風管連接方法有哪些？

發(fā)布人：http://www.hkcts.com.cn   發(fā)布時間：2023-01-11 13:43:25

通風風管的連接方式多樣，常見的管件類型有壓縮式、卡壓式、可撓式、卡箍式、膠粘式、活接式法蘭連接、承插焊接式、焊接式及焊接與傳統連接相結合的派生系列連接方式。還有螺紋鏈接的方式。
The connection modes of ventilation duct are various, and the common pipe fittings include compression type, clamp type, flexible type, clamp type, adhesive type, union type flange connection, socket welding type, welding type and the derivative series connection mode combining welding and traditional connection. There is also thread linking.
下面對主要的幾種方法給大家詳細說明下：
The main methods are described in detail below:
01抱箍式連接
01 Hoop-type connection
主要用于鋼板圓通風管道和螺旋風管連接，安裝時按氣流方向把小口插人大口，外面用鋼制抱箍將兩個端的鼓箍抱緊連接，用螺栓穿在耳環(huán)中間固定擰緊。
It is mainly used to connect the steel plate round ventilation duct and spiral air duct. During installation, insert the small opening into the large opening according to the airflow direction. The steel hoop is used outside to tightly connect the two ends of the drum hoop, and the bolt is threaded in the middle of the earring to fix and tighten.

02插接式連接
02 Plug-in connection
主要用于矩形或圓形風管連接。先制作連接管，然后插入兩側風管，再用拉鉚釘將其緊密固定。
Mainly used for rectangular or circular duct connection. First make the connecting pipe, then insert the air duct on both sides, and then fix it tightly with rivets.
03插條式連接
03 Plug connection
主要用于矩形風管連接。將不同形式的插條插入風管兩端，然后壓實。
Mainly used for rectangular duct connection. Insert different forms of inserts into both ends of the duct, and then compact.
04軟管式連接
04 Hose connection
主要用于風管與部件的相連。安裝時，軟管兩端套在連接的管外，然后用特別軟卡把軟管箍緊。
It is mainly used for the connection of duct and components. During installation, both ends of the hose shall be sleeved outside the connected pipe, and then the hose shall be clamped with special soft clamps.
如果是排煙風管的鏈接，排油煙管道還是應該焊接（特別是水平管，還要保證管道坡度以利于泄油）,避免漏油漏氣，以保證項目品質，
If it is the link of smoke exhaust duct, the smoke exhaust duct should be welded (especially the horizontal pipe, and the pipe slope should be guaranteed to facilitate oil leakage) to avoid oil leakage and gas leakage to ensure the quality of the project,
但由于排油煙內為高溫氣體，直接對接焊接可能也會導致使用過程膨脹裂開，在實際施工中，可以做翻邊滿焊，且不應是直角翻邊，以確保不受風管熱脹冷縮的影響，同時也加強了風管，
However, due to the high temperature gas in the exhaust fume, direct butt welding may also lead to expansion and cracking in the use process. In actual construction, flanging full welding can be done, and it should not be right-angle flanging, to ensure that it is not affected by the thermal expansion and contraction of the air duct, and also strengthen the air duct,
以上就是為大家介紹的有關濟南風管加工廠詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態(tài)度,為您提供服務http://www.hkcts.com.cn
The above is a detailed introduction about Jinan Air Duct Processing Plant, which I hope will help you. If you have any questions, please contact us. We will provide you with our service with our attitude http://www.hkcts.com.cn