通風管道不同環境的安裝有什么區別？

發布人：http://www.hkcts.com.cn   發布時間：2022-04-11 10:06:00

通風管道包括鋼板、鍍鋅板、不銹鋼、玻璃鋼等材料。安裝時需要根據凈化空調系統、空調系統、環境控制系統、工業通風系統等進行使用。具體使用環境選用不同的材料。那么通風管道不同環境的安裝有什么區別？它要注意這些內容！

Ventilation pipes include steel plate, galvanized sheet, stainless steel, FRP and other materials. During installation, it needs to be used according to purification air conditioning system, air conditioning system, environmental control system, industrial ventilation system, etc. Different materials shall be selected for specific use environment. What is the difference between the installation of ventilation ducts in different environments? It should pay attention to these contents!

通風管道不同環境的安裝有什么區別？

What are the differences in the installation of ventilation ducts in different environments?

1、安裝油煙通風管道

1. Install oil fume ventilation duct

安裝抽油煙機的通風管道，設以標準為準，一定要有廠家的合格證和檢驗證。通常通風管的尺寸在2000*450左右，是比較大的通風管。

When installing the ventilation duct of the range hood, the design shall be subject to the national standard, and the manufacturer's certificate and inspection certificate must be provided. Generally, the size of the ventilation pipe is about 2000 * 450, which is a relatively large ventilation pipe.

2、安裝浴霸通風管道

2. Install Yuba ventilation duct

浴霸通風管道的尺寸需要300*300mm或300*600，直徑在100到150之間。通風管道的尺寸應根據家庭面積選擇合適尺寸的通風管道。通風管道規格小于40cm的，吊架距離不大于4m。通風管道規格大于40cm的，吊架距離不大于3m。

The size of Yuba ventilation duct needs to be 300 * 300mm or 300 * 600, and the diameter is between 100 and 150. The size of ventilation duct shall be selected according to the family area. If the size of ventilation pipe is less than 40cm, the hanger distance shall not be greater than 4m. If the size of ventilation pipe is greater than 40cm, the hanger distance shall not be greater than 3m.

3、安裝新風系統通風管

3. Install the ventilation pipe of fresh air system

新風系統主機。金屬風管應保溫。減震器應安裝在吊桿上；新風輸出口、排氣輸出口和主機之間的連接應安裝消聲器或軟連接。

Fresh air system host. Metal air ducts shall be insulated. The shock absorber shall be installed on the suspender; Muffler or soft connection shall be installed for the connection between fresh air outlet, exhaust outlet and main engine.

通風管道安裝要注意這些內容：

Pay attention to these contents during the installation of ventilation duct:

1、通風管道安裝前的準備工作也非常重要，確保管道內外表面清潔，檢查其平整度和水平度，檢查現場結構預留孔的位置、尺寸、標高，擦拭風管內外。

1. The preparation work before the installation of the ventilation duct is also very important. Ensure that the internal and external surfaces of the duct are clean, check their flatness and levelness, check the position, size and elevation of the reserved holes of the site structure, and wipe the inside and outside of the duct.

2、安裝風管時還應注意：管道及配件的可拆卸接口不得安裝在墻壁和走道地板上；支架、吊架、托架的預埋件不得涂漆、支架、吊架、托架不得設置在風口、閥門、檢查門外。吊架不得直接掛在法蘭上。防火閥、電動風閥等部件應單獨設置吊架。

2. When installing the air duct, it should also be noted that the removable interface of the pipeline and accessories shall not be installed on the wall and walkway floor; The embedded parts of supports, hangers and brackets shall not be painted, and the supports, hangers and brackets shall not be set outside the air vents, valves and inspection doors. The hanger shall not be hung directly on the flange. Fire damper, electric air valve and other components shall be separately provided with hangers.

以上就是為大家介紹的有關濟南風管加工廠的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.hkcts.com.cn

The above is the detailed introduction of Jinan air duct processing factory. I hope it will help you If you have any questions, please contact us We will provide you with professional service http://www.hkcts.com.cn