設置排煙防火閥發揮好的效果

發布人：http://www.hkcts.com.cn   發布時間：2017-07-11 16:14:57

排煙防火閥通常設備在機械排煙系統的管道上，往常呈翻開狀況，火災時當排煙管道內煙氣溫度抵達280度時關閉，并在一守時間內滿意漏煙量和耐火無缺性要求，起隔煙阻火作用。多見的排煙防火閥材料有碳素鋼、鍍鋅板、不銹鋼。

Smoke damper usually equipment in pipeline mechanical exhaust system, is always open, fire when the exhaust pipe, the flue gas temperature at 280 degrees and arrived at the close, in a period of time with smoke leakage and no shortage of fire, smoke from the fire. Common smoke fire damper materials are carbon steel, galvanized sheet, stainless steel.

排煙防火閥具有漏風量低、氣密功用好、電動翻開耗費電流小、防腐功用強，運用壽命長、執行安排驅動活絡等特性。在設備排煙防火閥時應留心一下細節：

The smoke exhaust fireproof valve has the advantages of low air leakage, good air tightness, electric opening, small current consumption, strong antiseptic function, long service life, execution arrangement, drive, etc.. Pay attention to detail when smoke exhaust valve is installed:

設備排煙防火閥體前應查看閥門外形及操作安排是不是無缺,動作是不是活絡,供認閥門各方面都正常往后,再進行設備;設備排煙防火閥時閥體的一側應當預留出方位,通常應不小于350mm的凈空間,便于守時的動作實驗和查看。

The equipment for smoke fire before leading the valve body shape and operation arrangement is intact, action is not active, the admission valves are normal back, then the equipment equipment; smoke damper at one side of the valve body shall be set aside out of range, the net space is usually not less than 350mm, so punctual action test and check.

排煙防火閥門在設備之前或設備往后的運用中,應當守時進行翻開動作實驗,建議每半年到一年進行一次,動作實驗包含運用電信號運用閥門翻開或手動翻開,閥門動作后應當有電信號輸出.閥體宜有單獨的支吊架,以防止風管在高溫下變形而影響閥門功用。

Smoke fire valve in the use of equipment or equipment in the back before, should be punctual for open action experiment, every six months to a year of time, action experiments include to use telecommunications by the use of the valve open or manually open the valve action should have signal output. The valve body should be a separate hanger, to prevent wind pipe deformation at high temperature and the impact of valve function.

更多關于濟南通風管道的問題，請參見公司的網站：http://www.hkcts.com.cn

For more information about the ventilation ducts in Ji'nan, see the official website of the company: http://www.hkcts.com.cn