不銹鋼風管的連接方式有哪幾種？

發布人：http://www.hkcts.com.cn   發布時間：2022-03-09 15:26:17

不銹鋼風管，是用于空氣輸送和分布的管道系統。有復合風管和無機風管兩種。風管可按截面形狀和材質分類。風管制作不銹鋼風管制作是在咬口縫、鉚釘縫、法蘭翻邊四

Stainless steel air duct is a pipe system used for air transmission and distribution. There are two kinds of composite air duct and inorganic air duct. Ducts can be classified by section shape and material. The production of air duct stainless steel air duct is made in bite seam, rivet seam and flange flanging

角等縫隙處涂上密封膠（如中性玻璃膠）。涂密封膠前應清理干凈表面塵土和油污。按截面形狀，風管可分為圓形風管，矩形風管，扁圓風管等多種，其中圓形風管阻力

Apply sealant (such as neutral glass glue) to the gaps such as corners. Before applying sealant, clean the dust and oil stain on the surface. According to the section shape, the air duct can be divided into circular air duct, rectangular air duct, flat round air duct and so on

應用以矩形風管為主。按材質，風管可分為金屬風管，復合風管，高分子風管。

The application is mainly rectangular duct. According to the material, the air duct can be divided into metal air duct, composite air duct and polymer air duct.

不銹鋼風管的連接方式有哪些

What are the connection modes of stainless steel air duct

1、抱箍式連接：主要用于鋼板圓通風管道和螺旋風管連接，先把每一管段的兩端軋出鼓筋，并使其一端縮為小口。安裝時按氣流方向把小口插大口，外面用鋼制抱箍將兩個端的鼓箍抱緊連接，用螺栓穿在耳環中間固定擰緊。

1. Hoop type connection: it is mainly used for the connection of steel plate round air duct and spiral air duct. First roll out the bulge reinforcement at both ends of each pipe section and shrink one end into a small opening. During installation, insert the small opening into the large opening according to the direction of air flow, tightly connect the drum hoops at the two ends with steel hoops, and fix and tighten them in the middle of the earrings with bolts.

2、插接式連接：主要用于矩形或圓形風管連接。先制作連接管，然后插入兩側風管，再用拉鉚釘將其緊密固定。

2. Plug in connection: mainly used for rectangular or circular air duct connection. First make the connecting pipe, then insert the air ducts on both sides, and then fix it tightly with pull rivets.

不銹鋼風管的連接方式

Connection mode of stainless steel air duct

3、插條式連接：主要用于矩形風管連接。將不同形式的插條插入風管兩端，然后壓實。

3. Plug in connection: mainly used for rectangular air duct connection. Insert the two ends of the air duct in different forms, and then compact the air duct.

4、軟管式連接：主要用于風管與部件(如散熱器、靜壓箱側送風口等)的相連。安裝時，軟管兩端套在連接的管外，然后用特別軟卡把軟管箍緊。

4. Hose connection: it is mainly used for the connection between air duct and components (such as radiator, plenum side air supply outlet, etc.). During installation, both ends of the hose shall be sleeved outside the connected pipe, and then the hose shall be clamped tightly with a special soft clamp.

以上就是為大家介紹的有關濟南鐵皮風管加工的詳細介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.hkcts.com.cn

The above is a detailed introduction to the processing of Jinan iron sheet air duct. I hope it will help you If you have any questions, please contact us We will provide you with professional service http://www.hkcts.com.cn