通風管道在安裝的過程中有什么要求標準？

發布人：http://www.hkcts.com.cn   發布時間：2020-06-05 15:29:11

　　通風管道在安裝的過程中有什么要求標準 ？

　　What are the requirements and standards for the installation of ventilation pipes?

　　通風管道大家應該并不生疏，可以很好的保證空氣流利，降低有害濃度，鐵質通風管道設備主要是有風管消費設備廠家消費完成的，普通來說用于電子廠房的通風，酒店賓館，還有食品無菌車間等需求停止空氣更新的的空調系統。

　　We should not be unfamiliar with the ventilation pipe, which can ensure the air fluency and reduce the harmful concentration. The iron ventilation pipe equipment is mainly consumed by the air pipe consumer equipment manufacturers. Generally speaking, it is used for the ventilation of electronic factory buildings, hotels and hotels, as well as the food aseptic workshop and other central air conditioning systems that need to stop air renewal.

　　關于通風管道系統的安裝有很多的要求，下面小編就來簡單的說一說吧。

　　There are a lot of requests for the installation of ventilation system. Let's talk about it briefly.

　　在裝置的時分要關于風管的位置，高度，走向都要停止設計好，在風管的直徑上面請求可以保證關于空氣的更新的速度。

　　First of all, stop designing the position, height and direction of the air duct at the time of the device, and request on the diameter of the air duct to ensure the speed of air renewal.

　　關于風管的銜接局部，要停止嚴密銜接，中間所采用的墊片的厚度應該不小于3mm,墊片不應凸入管內,亦不宜突出法蘭外。關于金屬性的風管在轉彎的時分要遵照嚴厲的裝置請求。關于塑料軟管在彎道時要留意不應該有死彎或者塌陷。

　　As for the connection part of air duct, close connection shall be stopped. The thickness of gasket used in the middle shall not be less than 3mm. The gasket shall not protrude into the pipe or out of the flange. For metallic ducts, strict installation requirements should be followed when turning. As for the plastic hose in the curve, pay attention not to have dead bend or collapse.

　　風管裝置前,應肅清內、外雜物,并做好清潔和維護工作。同時關于風管的銜接局部的螺絲的位置要盡可能的便當以后的維修。

　　Before the air duct installation, the sundries inside and outside shall be removed, and the cleaning and maintenance work shall be done well. At the same time, the position of the local screw connecting the air duct shall be convenient for future maintenance.

　　以上是關于通風管道的安裝要求的簡述，想要了解更多內容歡迎咨詢濟南通風管道http://www.hkcts.com.cn官網。

　　The above is a brief introduction to the installation requirements of ventilation pipes. For more information, please consult Jinan ventilation pipes http://www.hkcts.com.cn Official website.