不銹鋼風管的優勢你知道是什么嗎?

發布人：http://www.hkcts.com.cn   發布時間：2019-01-22 13:35:53

不銹鋼風管這兩年在我國，可以說是風行全球，該市場近兩年暴升火爆，很多裝有空調的場所都可以見到不銹鋼風管的影子，那么接下來小編要給我們介紹的就是不銹鋼風管在裝置施工時需要注意哪些問題和它的一些作業條件，下面一起跟小編來了解下。

Stainless steel ducts have been popular all over the world in China in the past two years. The market has been booming in the past two years. Stainless steel ducts can be seen in many places equipped with central air conditioning. What problems should be paid attention to when installing stainless steel ducts and some operating conditions should be introduced to us in the next edition.

一、不銹鋼風管施工注意事項

Notes for Stainless Steel Ventilation Pipe Construction

1：一般的排風機體系和空調體系的裝置，都要在建筑物圍護結構施工完、障礙物已整理、地上無雜物的狀況下下才干進行施工。

1: The general exhaust fan system and air conditioning system should be constructed after the construction of the building envelope, the obstacles have been sorted out, and there is no debris on the ground.

2：對于空氣潔凈體系的裝置，應該在建筑物內部裝置部件的地上做好，墻面已抹灰結束，室內無灰塵飛揚或有防塵辦法的條件下進行施工。

2: For the air cleaning system, the installation should be completed on the ground of the internal parts of the building, the wall has been plastered, the indoor dust-free flying or dustproof methods.

3：一般除塵不銹鋼風管建議裝置宜廠房的工藝設備上，裝置完或設備基礎己確定后，設備連接器、罩體方位已知的狀況下進行施工。

3: The general dust removal stainless steel air duct recommendation device should be on the process equipment of the factory building. After the installation is completed or the equipment foundation has been determined, the construction should be carried out under the condition that the position of the equipment connector and cover body is known.

4：查看現場預留不銹鋼風管孔洞方位、尺寸，要求與施工圖紙保持一致，每個邊要比實踐截面大100mm。

4: Look at the orientation and size of the reserved stainless steel air duct holes on site, and the requirements are consistent with the construction drawings. Each side is 100 mm larger than the practical section.

5：不銹鋼風管作業地址要一定有相應的輔佐設施，如梯子、架子、防護、消防器材，并有施工員的技術、質量、交底。

5: The working address of stainless steel air duct must have corresponding auxiliary facilities, such as ladders, shelves, safety protection, fire fighting equipment, and the technical, quality and safety of the builders.

二、不銹鋼風管裝置資料條件

II. Data Conditions of Stainless Steel Air Pipe Devices

1：各類板材、管材等都要有質量證明系列文件和產品清單。

1: All kinds of sheets and pipes should have quality certification series documents and product lists.

2：風管成品不允許有變形、歪曲、開裂、孔洞、法蘭脫落、開焊、漏鉚、漏打螺栓孔等一系列缺陷狀況出現。

2: Deformation, distortion, cracking, holes, flange shedding, welding, riveting and bolt holes are not allowed in the finished duct.

3：通風管道工程裝置的閥體消聲器、罩體、風口等部件應查看調理裝置是否靈敏，消聲片、油漆層有無損害。

3: The valve body muffler, hood, tuyere and other components of ventilation pipeline engineering device should check whether the conditioning device is sensitive, and whether the muffler and paint layer are harmful.

4：裝置運用的資料：螺栓、螺母、墊圈、墊料、密封條、自攻螺釘、拉鉚釘、電焊條、各種帆布、無紡布、膨脹螺栓等都要契合產品質量的要求。

4: The materials used in the device: bolts, nuts, washers, gaskets, seals, tapping screws, rivets, welding rods, various canvas, non-woven fabrics, expansion bolts, etc. should meet the requirements of product quality.

以上信息是我們山東通風管道整理發布希望對大家有所幫助我們的網站是：http://www.hkcts.com.cn/!

The above information is our Shandong ventilation duct arrangement and release hope to help you with our website is: http://www.hkcts.com.cn/!