排煙管道該怎么設計安裝你知道嗎？

發布人：http://www.hkcts.com.cn   發布時間：2018-12-25 11:00:06

排煙管道的設備有利于室內空氣的流通，并且能夠有效的降低有毒氣體的濃度，下面就為咱們介紹一下排煙管道設備的一些注意事項。

The equipment of smoke exhaust pipe is conducive to the circulation of indoor air, and can effectively reduce the concentration of toxic gases. Here we introduce some points for attention of smoke exhaust pipe equipment.

處理各種排煙管道相碰及和諧的準則，通常為：“小管讓大管，有壓讓無壓”。例如，自來水管與風管相撞，則應當自來水管拐彎。冷、熱水管與下水管相碰，則應改變冷、熱水管道，排煙管道是為了使空氣流通，下降有害氣體濃度的一種市政基礎設施。

The criteria for dealing with the collision and harmony of various smoke exhaust pipes are usually as follows: "Small pipes let big pipes, pressure let no pressure". For example, when a water pipe collides with an air pipe, the water pipe should turn. When the cold and hot water pipes collide with the sewer pipes, the cold and hot water pipes should be changed. The smoke exhaust pipe is a municipal infrastructure for air circulation and reducing the concentration of harmful gases.

排煙管道設備設備所用板材、型材以及其他首要制品材料應契合規劃及有關產品現行規范的規則，并使用出廠查驗合格證明，材料進場時應按現行有關規范進行檢驗。

The sheet, profile and other primary product materials used in flue gas pipeline equipment shall conform to the planning and the current national standards for related products, and shall be inspected according to the relevant national standards when entering the field by using the certificate of qualifications for factory inspection.

排煙管道工程開始之前，應該將各工種的管線，單線畫在一張平面圖上。每種管道用一種彩色筆。在各交點處歸納其標高，看是不是有矛盾之處，及時發現，將問題處理在設備之前。

Before the start of the smoke exhaust pipeline project, the pipelines of various types of work should be drawn on a single plan. Each pipe uses a colour pen. Summarize the elevation at each intersection to see if there is any contradiction, find out in time, and deal with the problem before the equipment.

在熱處理車間，排煙管道設備需求依照車間設備工藝圖紙進行設備，然后依據實際需求進行調整，假如還不能堅持室內溫度安穩，需求對車間溫度設備調整器，一般的車間會以空調替代，所以咱們也要為空調加裝通風設備，這些設備的通風體系都是必不可少的。

In the heat treatment workshop, the demand of smoke exhaust pipe equipment is adjusted according to the workshop equipment process drawings, and then according to the actual demand. If the indoor temperature is not stable, the demand for the workshop temperature equipment regulator, the general workshop will be replaced by air conditioning, so we also need to install ventilation equipment for air conditioning. The ventilation system of these equipment is indispensable.

通風管道設備好今后需求考慮的因素就是耐腐蝕，因?yàn)榇蠖鄶?shù)的熱處理車間都是在較高溫度下作業的，有時需求用水進行冷卻，這就會形成很多的水蒸氣蒸發，這些氣體中都含有腐蝕性物質，所以管道一定要耐腐蝕。

The future requirement of ventilation pipeline equipment is corrosion resistance, because most heat treatment workshops operate at higher temperatures, and sometimes need water for cooling, which will form a lot of vapor evaporation, these gases contain corrosive substances, so the pipeline must be corrosion-resistant.

以上就是濟南通風管道設備所需的注意事項，比方耐腐蝕等等。期望以上的內容能夠?qū)Υ蠹乙院蟮纳顜?lái)一點幫助，我們的網站是：http://www.hkcts.com.cn！

Above are the matters needing attention for flue gas pipeline equipment, such as corrosion resistance and so on. Hope that the above content can bring a little help to everyone's future life, our website is: http://www.hkcts.com.cn!